The production cost is increasing, and many enterprises are starting to use automation equipment, such as automatic box gluing machines. Automated equipment can improve efficiency and has relatively fewer personnel. So how can these devices maximize their advantages? The first step is to solve the problem of scissors deviation. Generally speaking, the scissors error is mainly caused by the printing machine

Scissor difference

Scissors are available in various devices, including hand nails, semi-automatic, and fully automatic, it just depends on how to control them. If the scissors are poor, no matter what equipment is well controlled, the production efficiency will be very low. The formation of scissors gap is mainly due to poor line pressing of the printing machine, so we won't go into how to improve the printing line pressing here. Automatic box gluing and nailing machines generally have correction wheels and belt correction

Here we would like to mention the nail box machine of Dongguan Tianjin Machinery Co., Ltd. (hereinafter referred to as Tianjin Machinery). The reason why Tianjin Machinery's full/semi-automatic box nailing machine series is highly favored by the majority of cardboard box enterprises is mainly due to its brand's core technology, which has been continuously improved by a technical team with more than ten years of industry experience! The advantage is obvious, which can effectively solve the problem of scissors gap and solve the bottleneck of nail mouth in the middle and other later stages such as cardboard boxes

The main characteristics of its equipment include:

1. Single piece nail box machine: The rear panel adopts core technology, which can effectively solve the formation of scissor forks and increase the speed by 30% year-on-year

2. Double piece nail box machine: The rear panel adopts electric/computer adjustment, which is convenient and fast! No need for workers to wrap tools around the back of the machine to adjust the size of the first nail, effectively improving the time for changing orders

3. Traditional fully/semi-automatic box nailing machines usually have the nail opening near the middle of the cardboard box, which can cause difficulties in stacking and transportation of the cardboard box, and is prone to skewing and damaging the cardboard box, especially for large customers such as Gree and Midea who use automatic packing and packaging lines. And Tianjin's fully automatic box flipping machine seamlessly integrates with the fully/semi-automatic box nailing machine to design different specifications of overall solutions for different customers, which can completely solve the bottleneck problem of nail mouth in the middle and other paper box post-processing

Correction Wheel

The correction wheel is an important tool to assist in correcting the formation of cardboard boxes. When adjusting, it is necessary to match the gap and angle of the paper guide rod. The pressure clearance of the correction wheel should be adjusted from large to small, and the angle of the paper guide rod should be considered during adjustment to avoid being too abrupt. If the angle is adjusted too quickly, the forming effect of the cardboard box will be poor, and it will not have a corrective effect. Instead, it will cause the cardboard box pressure line to tilt, resulting in a difference in the scissors

Belt

The angle and synchronization of the belt are also important. Firstly, the belt drives the cardboard to rotate and enter the stacking area. Because the sizes of cardboard boxes are different, adjustments must be made every time an order is made, otherwise it will cause paper jams and skewed paper feeding. When adjusting the belt, it is important to consider the smooth transmission of cardboard on the belt to avoid the movement of one side being smooth while the other is stuck, which can result in a scissors gap. Of course, the synchronization of the belt is also very important, which requires regular inspection

When both the belt and the correction wheel are adjusted in place, it is necessary to increase the production speed. Running the product at a high speed will be better