TJ-HS2400 double-piece gluer: This is a new type of gluer developed for two-piece glued cartons. It is suitable for E, C, B, A, AB wave corrugated paperboards. It can produce single-piece and double-piece glued cartons. This gluer has a high tolerance for paper and the glue spraying system can be set independently. It can produce two-piece special-shaped boxes, flat boxes and single-piece boxes. In particular, large and high-strength corrugated boxes that are difficult to produce manually have significant production effects on this gluer.

1. The average box gluing speed can reach 60 meters/min

2. Equipped with independent cold glue system, hot melt glue spraying system automatically sprays glue

3. Adopting Siemens human-machine interface, the operation is simple and convenient, and the personnel only need to master simple common sense to operate

4. The whole machine is simple to operate, with strong adjustability, fast order change, and easy operation in 5-15 minutes

5. Multiple trigger opening modes, you can select the appropriate trigger mode according to the product to further increase the output

6. Applicable to E, C, B, A, AB corrugated paper

7. Especially suitable for gluing two-piece special-shaped boxes, flat boxes and single-piece boxes

8. You can choose to use hot glue alone or hot and cold glue at the same time according to the characteristics of the product. (Note: When using hot and cold glue at the same time, the product paste edge width must be greater than 35mm)