The semi-automatic nailing machine with double servo control system is a new product improved on the basis of the ordinary semi-automatic nailing machine. The transmission and operation of the whole machine adopt two sets of servo drive motors to drive the operation of the machine. The paper feeding part and nail head part of the machine are all driven by servo motors, which changes the shortcomings of ordinary nailing machines that use gears and bearings to drive the mechanical operation, reduces the failure rate of the machine and prolongs the service life. This double servo drive semi-automatic nailing machine has applied for two patents: servo drive paper feeding and rear baffle drive automatic adjustment patent. It is an ideal equipment for carton factories.

★ Japanese double servo drive, accurate precision, reduced mechanical transmission part, can effectively reduce the failure rate of the machine.

★ Touch screen operation, parameters (nail spacing, number of nails, nail type, rear baffle) are easy and quick to change.

★ The entire control system adopts Siemens PLC control system.

★ All switches in the control box are produced by Taiwan Shilin.

★ Photoelectric and proximity switches are produced by Taiwan Yangming.

★ Bottom mold and blade are made of Japanese tungsten steel (wear-resistant)

★ The entire set of nail heads are made of special steel, precision-processed by computer gongs, and produced in Taiwan.

★ The air compressor is produced by a Taiwanese factory.

★ All switches and buttons are produced by Taiwan Tiande.

★ Single nail, double nail, and reinforced nail (double nails at both ends and single nails in the middle) can be nailed at one time, which can meet the different requirements of different customers for nail types.

★ Changing the size of the carton and adjusting the nail distance of the carton can be completed in just one minute, which greatly saves time and is convenient to operate.

★ Covered and uncovered cartons can be nailed (if there is a cover or no cover to nail, please indicate it when ordering the machine).

★ The front paper feeding part counts automatically, and the paper feeding table is equipped with a photoelectric sensor device, which automatically rises when feeding paper.

★ The rear section has an automatic counting function. The number of finished products can be stacked and sent to the end of the conveyor according to the set number (1-99) for easy packaging and bundling.

★ Automatic alarm after the nail line is used up. (Avoid missing nails when there is no nail line, defective products with insufficient nails)

★ From the stapling of semi-finished products to the finished products and packaging and bundling, the entire process only requires two people to operate. The operation is simple and convenient to reduce wages.

Note: For more detailed technical parameters, please contact our technical staff

http://www.dgtianjin.cn